JABLOTRON 100 - wireless motion detector - JA-152P

In addition to the standard positioning in a room corner, it can be mounted on a wall surface using a bracket type JA-196PL-S, whereby the detector is partially recessed into the wall and is thus elegantly connected to it. For special applications such as mounting on the ceiling or mounting at an inclined detection angle, the JA-191PL articulated bracket can be used. The detector has pulse activation.

The detector can be used to control programmable PG outputs.

The resistance to false alarms can be adjusted to two levels.

The detector is equipped with a standardized white light resistance at the level specified as standard (up to 6000 lux).

The detector is addressable and occupies a position in the system.

Product Highlights:

• Suitable for the JABLOTRON-100+ system
• Only compatible with JABLOTRON 100+ alarm control panels of the JA-103 and JA-107 series
• For monitoring and protecting indoor spaces
• Bi-directional radio transmission
• Motion detection via passive infrared sensor
• 2-stage level setting of false alarm resistance
• Version with white lens optics
• Monitoring field 90°/12 m
• Mounting height 2.5 m above ground
• Smart watch function for optical alarm confirmation via LED
• Compatible with F-Link software from version 2.0.0
• Sabotage contact
• Delivery including battery
• Can be mounted with optionally available brackets JA-191PL, JA-196PLS

Technical data:

• Compatible with F-Link 2.0.0 and higher
• only with the central units JA-103 and JA-107
• Power supply: 1x lithium battery, CR123A (3 V / 1500 mAh)
• Typical lifespan 4 years (in smartwatch mode)
• Communication frequency: 868.1 MHz
• Communication range: approx. 300 m (open area)
• Recommended installation height: 2.2 - 2.5 m above the ground
• Detection angle / detection range 90° / 12 m
• Dimensions: 62 x 110 x 40 mm
• Classification Safety Level 2/Environmental Class II
• complies with EN 50131-1 ed. 2+A1+A2,
• EN50131-2-2
• Environment according to EN 50131-1 II. General indoor areas
• Operating temperature range -10 °C to +40 °C
• Also meets the requirements of EN 50130-4 ed. 2+A1, EN 55022, EN 50581