Ubiquiti UniFi Access Card &bull Pack of 20 &bull black &bull UA Card
Ubiquiti UniFi Access Card &bull Pack of…
51.70
Ubiquiti UniFi Elevator Starter Kit / UA-SK Elevator
Ubiquiti UniFi Elevator Starter Kit / UA-SK Elevator
Ubiquiti UniFi Elevator Starter Kit / UA-SK Elevator
Connects to elevator readers via PoE to authorize user floor selection. Supports up to 18 floors and digital inputs for vehicle status and emergency.
(1) Elevator hub
(1) G2 reader
(2) 2-wire PoE extender
(10) Access cards
Technical specifications
| UA Hub Elevator Mechanical | |
|---|---|
| Mass | 129.3 x 244.7 x 33.6mm (5.1 x 9.6 x 1.3") |
| Weight | 537 g (1.2 lbs) |
| Housing material | Polycarbonat |
| Mounting material | Polycarbonat |
| Hardware | |
| Network interface | (4) 10/100/1000 Base-T |
| Management interface | (1) 10/100/1000 Base-T |
| Power method | PoE++ |
| Max. energy consumption | 7 W (without PoE output) |
| PoE input | (1) PoE++, 50 V DC, 1.2 A |
| PoE output | PoE passthrough, (4) PoE, 50V DC, 42W total |
| ESD/EMP protection | Air: ±8kV, Contact: ±4kV |
| Digital input | (6) Vehicle position Up/Down/Stop/Full/Door open/Door closed (1) Emergency |
| Exits | (18) Relay rating 30 V DC/2A |
| LEDs | System: white/blue/red. Output relay: white |
| Keys | (1) Factory reset Terminal blocks |
| Operating temperature | -10 to 40 °C (14 to 104 °F) |
| Operating humidity | 5 to 95% non-condensing |
| Certifications | CE, FCC, IC |
| UACC-Extender-2Wire-Tx/Rx Mechanically | |
| Mass | 40 x 105 x 25mm (1.6 x 4.1 x 1") |
| Weight | PoE input: 77 g (2.7 oz) PoE output: 79 g (2.8 oz) |
| Housing material | Polycarbonat |
| Mounting material | Polycarbonat |
| Hardware | |
| Network interface | (1) 10/100 MbE (1) Homeplug AV |
| Management interface | (1) 10/100 MbE |
| Power method | PoE++ |
| Max. energy consumption | 3 W (without PoE output) |
| PoE input | (1) PoE++, 50 V DC, max. 1.2 A |
| PoE output | (1) PoE+, 48 V DC, 0.72 A |
| ESD/EMP protection | Air: ±8kV, Contact: ±4kV |
| LED | White |
| Operating temperature | -10 to 40 °C (14 to 104 °F) |
| Operating humidity | 5 to 95% non-condensing |
| Certifications | CE, FCC, IC |
| UA-G2 Mechanically | |
| Mass | 93 x 40 x 36.5mm (3.7 x 1.6 x 1.4") |
| Weight | 82 g (2.9 oz) |
| Housing material | Polycarbonate, glass |
| Assembly | In the wall, distribution box |
| Weatherproof | IP55 |
| Hardware | |
| Network interface | (1) 10/100 MbE RJ45 port |
| Connectivity | BLE 4.1 |
| Power method | PoE UL 294 Class 2 Power Limited Power Supply UL 60950-1/62368-1 LPS/PS2 power supply |
| Supported voltage range | 48V DC |
| Max. energy consumption | 5W |
| ESD/EMP protection | Air: ±15kV, Contact: ±8kV |
| Sensors | Proximity sensor |
| Speaker | (1) 8 ohms, 0.7 W |
| LEDs | R/G/B/W |
| button | (1) Factory reset |
| NFC frequency | 13.56 MHz |
| NFC reading range | < 30 mm |
| NFC standards | ISO 14443A, 14443B, 15693 |
| NFC technology | NFC tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire |
| Operating environment | Outdoor use |
| Operating temperature | -30 to 45 °C (-22 to 113 °F) |
| Operating humidity | 5 to 90% non-condensing |
| Software information | The software version of a product can be checked at https://unifi.ui.com |
| UL 294 level | Destructive Attack: Level I Line safety: Level I Endurance: Level I Standby power: Level I |
| UL 294 Declaration | Compliance with IEEE 802.3 specifications has not been verified under UL 294. The device shall comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| PoE cabling requirements | Cable 5e cabling is the recommended minimum performance category. The performance class used should match the transmission speed required at the installation site. The minimum allowable wire size for the connection between the PSE or power injector and the PD is 26 AWG (0.13 mm 2 ) for patch cable 24 AWG (0.21 mm 2 ) for horizontal or riser cable. |
| CAN/ULC-60839-11-1 Class | Grade assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number and date of issue and/or revision status | UA-G2/UA-G2-Black, V02 |
| LED | |
| system | Steady blue: Adopted/Device is ready. Constantly knows: takeover is pending. White/blue flashing: Firmware is being updated . Flashing red: emergency lock |
| UA card mechanically | |
| Mass | 85.6 x 54 x 0.8mm (3.4 x 2.1 x 0.03") |
| Weight | 5 g (0.18 oz) |
| format | ISO 7810 ID-1 |
| NFC frequency | 13.56 MHz |
| NFC technology | ISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol |
Details about Ubiquiti UniFi Elevator Starter Kit / UA-SK Elevator
Manufacurer:
UA-SK-Elevator
Weight:
0.537000
Storage:
Zentrallager
Recommended accesories for Ubiquiti UniFi Elevator Starter Kit / UA-SK Elevator
Reviews for Ubiquiti UniFi Elevator Starter Kit / UA-SK Elevator
Comments (0)
No customer reviews for the moment.
Do you have any questions about Ubiquiti UniFi Elevator Starter Kit / UA-SK Elevator- Contact our experts
Benjamin M. Tanner – Managing Director and Security Expert
Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.
- Personal advice
- Trained Expert
- Fast Reply
- 20 years of experience