Previous
Next
Share on
Facebook Twitter

Shelly · Hutschiene · "Wave Pro 2PM" · Relais · max. 25A · 1 Phase · 2x 16A · Messfunktion · Z-Wave

Article Nr 224179 EAN 3800235269121
Shelly · Hutschiene · "Wave Pro 2PM" · Relais · max. 25A · 1 Phase · 2x 16A · Messfunktion · Z-Wave
118.00
Tax included
0/5
Not in stock
Add to Cart
Add to Cart

Shelly · Hutschiene · "Wave Pro 2PM" · Relais · max. 25A · 1 Phase · 2x 16A · Messfunktion · Z-Wave

Professional 2-channel DIN rail Z-Wave® smart switch with power measurement

Suitable for home and building automation with remote control. DIN rail mounting in a circuit breaker box. Advanced security features.

  1. 2 outputs, 16 A each. Total device maximum 25 A.
  2. Power measurement on each channel individually and together
  3. DIN rail mounting possible
  4. 1-phase control
  5. Extremely low power consumption: < 0.3 W
  6. Z-Wave frequency band: 868.4 MHz (CEPT countries).
  7. Latest technology: Z-Wave 800 series
  8. Automatic setup with SmartStart
  9. Security 2 Authenticated for highest security
  10. Over-the-air firmware updates
  11. Works with Z-Wave certified gateways and over 4,000 Z-Wave devices

A gateway (smart hub) is not included in delivery. A gateway (smart hub) is required to configure the device.

WHY WAVE PRO 2 PM?
The best solution for new residential buildings and commercial facilities
Wave Pro 2PM is a single-phase 2-channel relay that supports up to 16A per channel with a total device capacity of 25A . It is equipped with two integrated power meters that allow customers to control and monitor consumption for each channel separately and/or together. Different types of actions, scenarios and schedules can be set to synchronize your environment with your daily activities or business needs.

INTRODUCTION TO Z-WAVE

Shelly Qubino works on Z-Wave

By using Z-Wave, smart home products can communicate seamlessly with each other thanks to a central smart hub, regardless of their brand or platform! Shelly Qubino devices work with the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes worldwide.

*Z-Wave devices have certain requirements for proper functioning, such as the need to use a supported Z-Wave hub.
For more information, visit the official Z-Wave website: www.z-wave.com

Works with any Z-Wave gateway

The Wave Pro series is designed to be installed on the DIN rail in the circuit breaker box. After installation, integrate it into your Z-Wave network (Z-Wave gateway is required) and control connected devices from anywhere using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways.

Functionalities

Z-Wave operated

Integrate Wave Pro 2PM into your Z-Wave network and control it remotely. It is compatible with all certified Z-Wave gateways.

2 outputs of 16 A each

Wave Pro 2PM has a total device power of 25 A.

Performance measurement

Wave Pro 2PM provides precise monitoring of power consumption on each channel (W) or together (W, kWh).

Wide range of voltage support

Use it to control a wide range of AC devices and appliances.

Associations

Set up direct communication between devices in your local Z-Wave network and define actions without the need for a hub!

The highest level of security

Integrate the device as Security 2 Authenticated for encrypted communication and maximum security of your Z-Wave network.

USE CASES

Endless applications

Dynamic lighting control for greater efficiency

Automate your lighting and optimize its energy consumption through smart schedules, scenes, actions, etc. With Wave Pro 2PM, you can automate the lighting on each floor separately and set individual schedules for each floor. Set all the lights in the office to turn off when everyone has left the premises and don't worry about wasting energy during non-working hours.

Intelligent conference room

Automate conference rooms so they are fully ready for your business meetings. Establish local (direct) communication between Z-Wave devices on your network and perform actions without a Z-Wave gateway. The motion sensor triggers the Wave Pro 2PM to turn on the lights and projector so the conference room is instantly ready for your presentation!

Any Z-Wave motion or door sensor can be used with Wave Pro 2PM

Track and optimize your energy consumption

Keep an eye on the real-time consumption of devices and prevent unnecessary energy consumption in the office on weekends! With Wave Pro 2PM, you can accurately measure the power consumption for each channel individually (W) and together (W, kWh). There are many devices that employees forget to turn off when they leave the office on Friday, such as monitors, plugged-in chargers, desk lamps or printers, which puts an unnecessary burden on monthly bills. Use smart schedules to cut off power to office devices on the weekend and restore it before employees arrive at the office.

Preventive management

When an electrical appliance is damaged, it doesn't just stop working. It usually increases the amount of energy it uses to balance its operating capacity. Since there is no visible difference in performance, it can take months before you notice a problem, leading to inefficiency and wasted energy. Wave Pro 2PM, on the other hand, reports the increase in energy consumption immediately, saving you from additional costs for repairs or appliance replacement.

Wave Pro Series

The Wave Pro series features temperature, overload and overvoltage protection* and is designed for installation in the circuit breaker box (DIN). The Pro range enables complete intelligent automation without additional cables or wires and is perfect for homes, offices, shops, commercial and manufacturing facilities and new buildings.

Safety devices

Overheating protection


If the temperature level is unsafe or the temperature rises rapidly, the device shuts off the outputs and sends a notification. The internal temperature sensor measures the heat every 100 ms.

Specifications
Power supply 110-240 V AC, 50/60 Hz
power consumption < 0.3W
Power measurement (W) Yes
Max. switching voltage AC 240V
Max. switching current AC 16 A per channel, 25 A total
Max. switching voltage DC N/A
Max. switching current DC N/A
Overheating protection Yes
Surge protection Yes
Overvoltage protection Yes
distance Up to 40 m indoors (depending on local conditions)
Z-Wave Repeater: Yes
CPU Z-Wave™ S800
Z-Wave frequency bands 868.4MHz
Maximum transmitted radio frequency power in frequency bands < 25mW
Size (H x W x D) 94x19x69 ±0.5mm / 3.70x0.75x2.71 ±0.02inch
Weight 75g / 2.65oz.
Assembly DIN rail
Screw terminals max. torque 0.4 Nm / 3.54 lbs
Conductor cross-section 0.5 to 2.5 mm² / 20 to 14 AWG (green connectors) 0.5 to 1.5 mm² / 20 to 16 AWG (white connectors)
Length of stripped conductor 6 to 7 mm² / 0.24 to 0.28 inches (green terminals) 5 to 6 mm / 0.20 to 0.24 inches (white terminals)
Shell material plastic
Color Black
Ambient temperature -20 °C to 40 °C / -5 °F to 105 °F
humidity 30% to 70% relative humidity
Max. height 2000 m / 6562 feet.

Details about Shelly · Hutschiene · "Wave Pro 2PM" · Relais · max. 25A · 1 Phase · 2x 16A · Messfunktion · Z-Wave

Brand
Category Smart home Brand Shelly Reference 224179 EAN13 3800235269121 Delivery Time Delivery in 48-72H

Manufacurer:

Shelly_W_Pro_2PM

Weight:

Shelly_W_Pro_2PM

Recommended accessories for Shelly · Hutschiene · "Wave Pro 2PM" · Relais · max. 25A · 1 Phase · 2x 16A · Messfunktion · Z-Wave

Reviews for Shelly · Hutschiene · "Wave Pro 2PM" · Relais · max. 25A · 1 Phase · 2x 16A · Messfunktion · Z-Wave

Comments (0)
No customer reviews for the moment.

Do you have any questions about Shelly · Hutschiene · "Wave Pro 2PM" · Relais · max. 25A · 1 Phase · 2x 16A · Messfunktion · Z-Wave- Contact our experts

Benjamin M. Tanner – Managing Director and Security Expert

Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.

  • Personal advice
  • Trained Expert
  • Fast Reply
  • 20 years of experience

Shelly · Hutschiene · "Wave Pro 2PM" · Relais · max. 25A · 1 Phase · 2x 16A · Messfunktion · Z-Wave

Article-No. 224179 Category: Smart home Brand: Shelly EAN13 3800235269121

Our website uses cookies.

Further information can be found here: Privacy Plicy