Anycubic UV Resin 1L Grey

• Professional LCD resin. Printing efficiency with this resin is higher than with commercially compatible DLP/LCD/SLA resins. This resin is intended only for printers with LCD screens. Do not use with DLP or SLA machines!
• High-speed curing. This resin ensures the strength of the molded parts and prevents excessive shrinkage. It also improves the printing speed and curing time, improving the printing efficiency of LCD printers.
• Strong adhesion to the model during printing and easy release afterward. This not only positively impacts the print success rate and precision, but also minimizes the required release force afterward. This makes it easier to remove the model attached to the print platform. The lower viscosity also simplifies cleaning of the machine and model.
• The material is both rigid and tough. A material that's too rigid can cause the model to shatter in finished prints, while a material that's too flexible is prone to loss of print accuracy and deformation. Our material combines both, achieving first-class print results.
• The resin remains stable and easy to store even under different climatic conditions.

Information:

Precautions:

Storage method:

1. Protect from light and store at room temperature. (Sunshine contains a lot of UV light and will solidify the light-sensitive resin.)
2. It is recommended to store the resin at an ambient temperature of 15 to 35 °C. The lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust, or humidity may affect print quality.

Use:

1. Shake well before use. Avoid using resin in areas exposed to strong sunlight.
2. When using resin, wear gloves to avoid direct skin contact and keep the room ventilated.
3. In case of accidental contact, rinse immediately with plenty of water. If you feel unwell, seek medical attention immediately.
4. Printed models: Use high-concentration alcohol to clean the finished printed object (recommended concentration of 95% or more, the higher the better). Clean the object for approximately 30 seconds for the best possible cleaning.
5. Pour any unused resin back into the original resin bottle. Also, avoid leaving the resin in the vat for too long without use, as any resin contamination could affect future prints (without pouring the resin into airtight containers or sealing it with plastic wrap).

The ANYCUBIC resin is best suited for the Anycubic Photon / Photon S.

The printer's light source design, exposure time, and other printing parameters vary among different LCD 3D printer manufacturers. The composition ratio of the resin developed by ANYCUBIC for the Photon is specifically engineered and best matches the Photon's printing parameters.