How do I adjust the volume?

Turn key tone (click tone) on/off | Adjust operating, information and alarm tones | Language volume | Message volume
# Secvest Touch wireless alarm system (FUAA50500)

Reading time: approx. 2 minutes

As an administrator , you can determine whether and how loudly the Secvest provides acoustic feedback:

  • when using the local user interface .
  • for information, e.g. if there is a fault.
  • in case of alarm.

In addition, you determine:

  • the “Language Volume” for e.g. the message “Please note the information in the display”.
  • at what volume the alarm center plays spoken messages to users = “Message Volume”.

As a normal user , you can determine whether a quiet “click sound” (= key sound) should be heard each time the keys are touched.

requirements

In order to adjust the volume of the Secvest, the following requirements must be met:

To activate or deactivate the Secvest key tone, the following requirements must be met:

  • The Secvest has been put into operation.
  • The code (and optionally: the user name for the web interface) of a normal user .

Key tone (“click tone”)

volume

  • Log in as administrator, e.g. using the Secvest local user interface.
  • Go to the path Advanced User Menu > Configuration > Volume Settings by navigating with the arrow keys and the confirmation keys.

The numbers 0-9 indicate the volume of the corresponding tones, where 0 means silent and 9 means maximum volume.

  • Select the sounds whose volume you want to adjust:
  • Operating tones
  • Info tones
  • Alarm tones
  • Language Volume
  • Message Volume
  • Adjust the volume: “ + ” means louder and “ – ” means quieter.

Notice

For safety reasons, we recommend leaving the alarm tones at the setting “9” .

With a lower value (= quieter alarm), people on site may not notice the alarm or may notice it too late.

Our website uses cookies.

Further information can be found here: Privacy Plicy