The LE 232 has perfect human detection and secures your property. It can be operated independently or work closely with your XT headquarters. The alarm center can specifically switch the functions of the LE 232 on and off in order to adapt them even more individually to your wishes.
Make your camera even smarter with automation rules
The intelligent motion detection of the LE 232 ensures that every person or vehicle on your property is recognized as such. However, LE 232 cannot distinguish whether this person is currently allowed to be there or not.
With the following automation rules you can ensure that your LE 232 only triggers an alarm when it really should.
Step-by-step instructions
After initially setting up your LE 232, you can add it to your XT under Smarthome → Cameras.
You can then store the following rules under Smarthome → Automation:
Activate detection functions when arming
Condition: Mode → Area 1 → Full arm
Schedule: Always
Action: IP camera → Your LE 232 → Activate motion detection
"Add action"
IP camera → Your LE 232 → Smart motion detection
With this rule you ensure that the motion detection and intelligent motion detection of the LE 232 are only activated when you arm your XT control panel. It is important that you enable both detections because smart detection only works if normal detection is also active.
Deactivate detection functions when disarming
Condition: Mode → Area 1 → Disarm
Schedule: Always
Action: IP camera → Your LE 232 → Disable motion detection
"Add action"
IP camera → Your LE 232 → Smart motion detection
With this rule you ensure that the motion detection and intelligent motion detection of the LE 232 are deactivated as soon as you disarm your XT control panel. It is important that you deactivate both detections so that the LE 232 no longer saves recordings in blurred mode.
Activate floodlights when alarm occurs
Condition: When an alarm is triggered → Area 1 → All alarms
Schedule: Always
Action: IP camera → your LE 232 → turn on the floodlight → 60 seconds
With this rule, your XT control panel will directly activate the floodlights of your LE 232 in the event of an alarm. This will ensure you have enough attention to scare a burglar away.
In a future opportunity, we will also show you how you can use your LE 232 to trigger functions in your XT control center.
This automation rule ensures that when the XT is armed, motion detection and intelligent activation are also activatedBewegungserkennung der LE 232 aktiviert wird.
This automation rule ensures that when the XT is disarmed, motion detection and intelligent activation are also activatedBewegungserkennung der LE 232 deaktiviert wird.
Related products
- -9%