Ubiquiti UniFi Access G2 Reader/ POE / -30 to 45° C / UA-G2-Black
Ubiquiti UniFi Access G2 Reader/ POE / -30 to 45° C / UA-G2-Black
Ubiquiti UniFi Access G2 Reader/ POE / -30 to 45° C / UA-G2-Black
Compact second-generation NFC card reader and prompt device that supports door unlocking via hand gesture.
Unlock with an NFC card or the UniFi Identity mobile app
Additional hand wave unlock function
Welcome messages for entry and exit
Connects to the UniFi Access Hub via PoE
Weather resistance IP55 (-30 to 45° C)
Technical specifications
| Mechanically | |
|---|---|
| Mass | 93 x 40 x 36.5mm (3.7 x 1.6 x 1.4") |
| Weight | 82 g (2.9 oz) |
| Housing material | Polycarbonate, glass |
| Assembly | In the wall, distribution box |
| Weatherproof | IP55 |
| Hardware | |
| Network interface | (1) 10/100 MbE RJ45 port |
| Connectivity | BLE 4.1 |
| Power method | PoE UL 294 Class 2 Power Limited Power Supply UL 60950-1/62368-1 LPS/PS2 power supply |
| Supported voltage range | 48V DC |
| Max. energy consumption | 5W |
| ESD/EMP protection | Air: ±15kV, Contact: ±8kV |
| Sensors | Proximity sensor |
| Speaker | (1) 8 ohms, 0.7 W |
| LEDs | R/G/B/W |
| button | (1) Factory reset |
| NFC frequency | 13.56 MHz |
| NFC reading range | < 30 mm |
| NFC standards | ISO 14443A, 14443B, 15693 |
| NFC technology | NFC tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire |
| Operating environment | Outdoor use |
| Ambient temperature during operation | -30 to 45 °C (-22 to 113 °F) |
| Ambient humidity during operation | 5 to 90% non-condensing |
| Software information | The software version of a product can be checked at https://unifi.ui.com |
| UL 294 level | Destructive Attack: Level I Line safety: Level I Endurance: Level I Standby power: Level I |
| UL 294 Declaration | Compliance with IEEE 802.3 specifications has not been verified under UL 294. The device shall comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| PoE cabling requirements | Cable 5e cabling is the recommended minimum performance category. The performance class used should match the transmission speed required at the installation site. The minimum allowable wire size for the connection between the PSE or power injector and the PD is 26 AWG (0.13 mm 2 ) for patch cable 24 AWG (0.21 mm 2 ) for horizontal or riser cable. |
| CAN/ULC-60839-11-1 Class | Grade assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number and date of issue and/or revision status | UA-G2/UA-G2-Black, V02 |
| LED | |
| system | Steady blue: Adopted/Device is ready. Constantly knows: takeover is pending. white/blue Flashing: Firmware is being updated. Flashing red: Emergency lock |
| software | |
| Management application | UniFi Access: Version 1.5.9 and higher |
Details about Ubiquiti UniFi Access G2 Reader/ POE / -30 to 45° C / UA-G2-Black
Manufacurer:
UA-G2-Black
Weight:
0.082000
Storage:
Zentrallager
Recommended accessories for Ubiquiti UniFi Access G2 Reader/ POE / -30 to 45° C / UA-G2-Black
Reviews for Ubiquiti UniFi Access G2 Reader/ POE / -30 to 45° C / UA-G2-Black
Comments (0)
Do you have any questions about Ubiquiti UniFi Access G2 Reader/ POE / -30 to 45° C / UA-G2-Black- Contact our experts
Benjamin M. Tanner – Managing Director and Security Expert
Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.
- Personal advice
- Trained Expert
- Fast Reply
- 20 years of experience