ALLNET (Akuvox C319) Touch Display Tablet DS10 10 inch PoE with 4GB/16GB, Android, SIP, WLAN

The ALLNET DS10 is a special display for integration into telephone systems and door stations. The SIP integration makes it possible to integrate the display as a telephone into a PBX, e.g. Fritz Box, 3CX etc. It is also possible to configure the display as a PBX.

This means that you can use it as a telephone system for telephony. Another special feature is the possibility of storing action URLs as buttons. This makes it possible to call the lift or operate a door opener. 2 built-in relays can also be controlled to carry out further switching operations. The built-in SOS function is particularly suitable for older people. It is possible to store several telephone numbers that can be called at the same time.

*Playstore installation via external APP for integration into home automation solutions and flexible use possible, automatic display switch-off and touch to wake function

Update firmware: https://fileshare.allnet.de/s/5f8UzSYiv07M7DZ Download firmware and install it using the update function in the backend.

Technical Details

• Front panel: Plastic
• RAM / ROM: 4GB / 16GB
• Display: 10 inch IPS LCD
• Screen: 10 inch capacitive touch screen
• Wi-Fi: IEEE802.11 b/g/n, @2.4GHz
• BLE: Support BLE 4.2
• Camera: no camera
• Memory slot : 1 Micro SD slot
• RS485 port: Support
• Relays out: 2
• Bell in: 1
• Microphone: -26dB
• Speaker: Dual speakers, 4O / 3W
• Ethernet ports: 1xRJ45, 10/100Mbps adaptive
• 802.3af Power over Ethernet
• 12V DC connector (if not using PoE)
• Tamper resistant: Support
• Installation: Wall-mounted & Desktop
• Dimensions: 251x182.5x29.75mm
• Working Humidity: 10~90
• Working Temperature: -10°C ~ +45°C
• Storage Temperature: -20°C ~ +70°C

Touch screen display

• Display Mode: Normally black, Transmissive
• LCD Size: 10inch (Diagonal)
• Aspect Ratio: 16:10
• Resolution: 1280x800
• Contrast ratio: 900:1
• Luminance: 350 cd/m²
• Viewing Angle: 80° Left, 80° Right,
• 80°Upper, 80°Lower
• Touch Screen: Projected capacitive

Audio

• SIPv1 (RFC2543), SIPv2 (RFC3261)
• Narrowband audio codec: G.711a, G.711µ, G.729
• Broadband audio codec: G.722
• DTMF: In-band, out-of-band DTMF (RFC2833), SIP Info
• Echo Cancellation
• Comfort Noise Generator
• Automatic Gain Control

Video

• Streaming formats: H.263 & H.264

Networking

• Protocols supported: IPv4, IPv6, HTTP, HTTPS, FTP, TFTP, SNMP, DNS, SNTP, RTSP, SRTP, RTP, TCP, UDP, TLS, ICMP, DHCP, ARP

Deployment & Maintenance

• Auto-provisioning
• Web management portal
• Web-based packet dump
• Configuration backup / restore
• Firmware upgrade
• System logs (including door access logs)

* Playstore Installation: The Google Framework is installed using an installation app. The installation takes a long time. The Google Files update automatically after installation. This can take up to several hours.