LUPUS - Water detector for the XT2 Plus

The LUPUSEC - XT2 Plus water detector reliably alerts you to water damage or flooding. To do this, simply place the water detector on the floor (e.g. near the washing machine). Alternatively, you can connect an external sensor via cable and attach it so that only this has contact with the floor. The detector itself can therefore also be mounted on the wall. Every contact with water activates a siren built into the detector and transmits an alarm to the control center.

The water detector is also battery-operated and is connected to the alarm system wirelessly. It can therefore be installed near the floor in any room. Cables for signal transmission or a power supply via a power pack are NOT necessary. Simply connect the water detector to the alarm system via the control panel and set it up.

Product Highlights:

• Only compatible with: XT1 Plus, XT2 Plus, XT3, XT4
• Reliably reports water on contact
• Protects against water damage
• Easy to assemble
• Waterproof sensor (cable)
• Additional sensor on the bottom of the housing
• Alert in case of alarm via the control center via SMS, (phone call), email and contact ID

Technical data:

• Dimensions: 95 x 29.5 x 82.5mm (LxWxH)
• Weight: approx. 0.12 kg (including battery)
• Detection method: resistance measurement
• Sensor type: resistance bridge
• Tamper monitoring: No
• Tamper indication of the sensor in the control panel: No
• Status display: No
• Status monitoring and display by the control center: Yes
• Radio frequency: 868.6625 MHz
• Radio power: max. 10mW
• Transmission range: Approx. 30 to 100 meters (depending on local conditions)
• Communication method: ZigBee HA 1.2 Pro
• Mounting options: Screwed
• Power supply: 1 x CR123A 3V lithium battery
• Average battery life: approx. 2.6 years (if activated once a month)
• Installation location: wall, floor
• Directive compliant: CE, FCC, RoHs
• Working temperatures: -10°C to 45°C
• Compatibility: XT1 Plus, XT2 Plus, XT3, XT4

Scope of delivery:

• 1x LUPUSEC - wireless water detector
• 1x CR123A 3V lithium battery
• 1x screws and dowels
• 1x manual