LUPUS - Glasbruchmelder V2

The glass break detector V2 for the LUPUS alarm system is a sensor that immediately detects breaking glass and reports it reliably. The glass break sensor is therefore installed near panes and windows. The glass break detector is battery-operated and is in radio contact with the alarm system within radio range. Cables for signal transmission or a power supply via a power pack are NOT necessary.

Whether at home, in a business, shop or office building: the LUPUS glass break detector V2 makes your property safe. And thanks to the new, elegant design, it fits perfectly into your home. Simple, attractive and safe.

Product Highlights:

• Compatible with Lupusec XT1 Plus, XT2 Plus, XT3 (New RF version also with XT1 and XT2)
• Reliably detects acoustically breaking window glassSaves 3 images in the control center in the event of an alarm / movement
• No activation if other glass objects in the room break
• Max. distance to glass: 9m
• No wiring required
• Alert in case of alarm via the control center via SMS, email or contact ID

Technical data:

• EAN: 4260195433816
• Dimensions: 75 x 75 x 23.8 mm (LxWxH)
• Weight: approx. 50 grams (without batteries)
• Detection method: Acoustic
• Sensor type: microphone sensor
• Tamper monitoring: Yes
• Tamper indication of the sensor in the control panel: Yes
• Status display: Yes (internal)
• Status monitoring and display by the control center: Yes
• Radio frequency: 2.4 GHz ZigBee HA 1.2
• Radio power: max. 10mW
• Transmission range: Approx. 30 to 100 meters (depending on local conditions)
• Modulation: FM
• Mounting options: Screwing
• Power supply: 3V DC, Li-battery type CR123
• Average battery life: 2 years
• Installation location: Opposite the glass surfaces to be monitored, indoor area only
• Directive compliant: CE, FCC, RoHs
• Compatible with XT Central: XT1 Plus, XT2 Plus, XT3, XT4

Scope of delivery:

• 1x Lupus - 12103 - Wireless glass break detector V2
• 1x 3V DC, Li-battery type CR123
• 1x screws and dowels
• 1x manual