HikVision - Wireless control unit with display

The HikVision wireless control unit with display is an accessory for the AX Pro burglar alarm system and is used to control the alarm system . The main function of the control unit is to activate and deactivate when entering and leaving the building. However, you can also activate the presence (internal) via the control unit. Panic alarms, medical emergency calls or switching on electrical devices are also possible. Thanks to the display, you can even make system settings for the control panel.

Like all other components, the control unit is battery-operated and the normal battery life is around 2 years. The wireless control unit communicates with the control center (AX Pro) via an encrypted wireless protocol and is thus protected against, for example, the code being read out. The wireless range outdoors (without obstacles) is up to 1,200 m.

Characteristics:
The system can be set to arm/disarm and partially arm modes using the keypad and PIN code entry. It is also possible to switch individual areas (groups) separately.

Product Highlights:

• Bidirectional communication / 128 bit AES encryption
• Integrated RFID card reader
• Arm / disarm, acknowledge alarm
• LED indicates the programmed zone
• Trigger fire, panic, emergency alarm at the touch of a button, silent and acoustic alarms can be selected
• Output control
• Keys with LED backlight
• Fully configurable remotely via the app
• Multiple learning methods and simple installation design
• Battery easily replaceable
• Frequency hopping for interference-free transmission

Technical data:

• Article number: 0029503
• EAN No.: 4003318373787
• Radio frequency 868 MHz
• Radio modulation 2GFSK
• Radio range: (open field) 1,200 m
• Tamper contact: front and back
• On / off switch √
• Acoustic signal generator √
• Display error (orange), learning mode (red/green), arming (blue), disarming (green) and alarm (red)
• Backlight White
• Number keys: 0 to 9
• Function keys: *, #, Arm, Disarm
• Protocols 2-way radio technology (bidirectional) Electrical properties
• Power consumption 1.5 V DC, <180 uA Battery type 4x CR23 batteries Battery life Standby time of more than two years
• Operating humidity 10% to 90% (non-condensing)
• Operating temperature -10°C to 55°C (14 °F to 131 °F)
• Color white
• Mounting location wall
• Dimensions (W x H x D) 174.63 x 109.62 x 25.25 mm
• Weight without batteries: 151 g – including batteries 243 g

Scope of delivery:

• 1x HikVision wireless control unit DS-PK1-E-WE