Knowledge Base Lupus XT1 PLUS, XT2 PLUS & XT4

How do I calculate the inrush current of my roller shutter motor

Calculate inrush current of roller shutter motor # ROLLER SHUTTER MOTOR, INRUSH CURRENT Reading time: approx. 3 minutes (for all variants) The maximum load we specify refers to the normal load during operation. However, a motor always has a higher in…

How do I correctly set up an automation in my LUPUS Smarthome (XT1 or XT2)?

Create smart home rules correctly in e.g. the LUPUS XT2 PLUS. # LUPUS XT1 PLUS, LUPUS XT2 PLUS, LLUPUS XT4, AUTOMATION, SMARTHOME Reading time: approx. 10 minutes (for all variants) To set up home automation correctly, several steps are necessary, de…

How do I set up an attendance simulation at LUPUS

Presence simulation on the LUPUS XT1 PLUS, XT2 PLUS and XT4 # LUPUS XT1 PLUS, LUPUS XT2 PLUS, LLUPUS XT4, PRESENCE SIMULATION Reading time: approx. 5 minutes (for all variants) Automation: “Random Execution” General To create a presence simulation, t…

How do I set up port forwarding in my router for the LUPUS XT1, XT2 or XT4 in my router?

Setting up port forwarding for a LUPUS XT1 PLUS, XT2 PLUS or XT4 # LUPUS XT1 PLUS, LUPUS XT2 PLUS, LLUPUS XT4, PORT FORWARDING Reading time: approx. 5 minutes (for all variants) A1 HybridBox Allnet Router Arcor Router Asus Router Belkin Router EPC392…

How do I set up remote access for a Lupus device?

LUPUS - Assigning the appropriate IP address – DHCP or static IP address

Assigning the appropriate IP address # LUPUS XT1 PLUS, LUPUS XT2 PLUS, LLUPUS XT4, IP ADDRESS, DHCP Reading time: approx. 7 minutes For the IP address you can choose whether you want to use DHCP or assign a static IP address. DHCP ( d ynamic h ost c …

LUPUS - Email sending does not work.

Supported email accounts and the correct configuration # LUPUS XT1 PLUS, LUPUS XT2 PLUS, LUPUS XT4, EMAIL Reading time: approx. 3 minutes Generally Make sure that the IP settings of the control panel are correct – if in doubt, please use “Obtain an I…

LUPUS - How do I set up the IP address using the IP Finder?

# LUPUS XT1 PLUS, LUPUS XT2 PLUS, LUPUS XT4, LUPUS NVR, LUPUS IP FINDER Reading time: approx. 4 minutes We deliver the XT1 and our LE9xx series network cameras with a static IP address (192.168.1.200). In order to access the cameras, you must adapt t…

LUPUS - Outdoor Siren V2, which settings can I make with the XT1 PLUS, XT2 PLUS and XT4?

Setting options of the LUPUS outdoor siren V2 with the LUPUS XT1 PLUS, XT2 PLUS and XT4 # LUPUS outdoor siren V2, settings Reading time: approx. 2 minutes (for all variants) You can make three settings: Switch off the tamper contact for one hour (e.g…

LUPUS - Port forwarding and remote access in IPv6 networks (DSLite)

Why can't I remotely access my router using IPv6 or DS-Lite Tunnel? # LUPUS XT1 PLUS, LUPUS XT2 PLUS, LLUPUS XT4, PORT FORWARDING Reading time: approx. 5 minutes (for all variants) Why can't I remotely access my router using IPv6 or DS-Lite Tunnel? I…

LUPUS - Which app do I need for my product?

Install and configure Lupus APP for e.g. the XT1 PLUS or XT2 PLUS #LUPUS APP #LUPUS ANDROID APP #LUPUS IOS APP Reading time: approx. 1 minute Please note that we cannot accept any responsibility for functionality, setup or other problems caused by th…

LUPUS - Which batteries does my sensor need?

Which batteries do I need for my sensor # LUPUS COMPONENTS, BATTERIES Reading time: approx. 5 minutes (for all variants) We try to keep this list as up-to-date as possible. However, the battery type may have changed, especially in older sensors. Ther…

LUPUS - Why do my ZigBee / Smarthome devices have a different range than my hazard detectors?

Different radio ranges of the LUPUS radio alarm components # LUPUS, ZIGBEE, WIRELESS RANGE Reading time: approx. 5 minutes (for all variants) In contrast to our danger detectors which transmit on 868MHz, our home automation devices use a ZigBee proto…

LUPUS RADIO REPEATER (LU12016) - WHICH PRODUCTS ARE COMPATIBLE?

You can extend the range of the following products with the radio repeater (LU12016): # LUPUS XT1 PLUS, LUPUS XT2 PLUS, LLUPUS XT4, RADIO REPEATER Reading time: approx. 5 minutes (for all variants) product Item No. Danger alarm Window / door contact …

LUPUS RADIO REPEATER (LU12122) - Which products are compatible?

You can extend the range of the following products with the radio repeater V2 (LU12122) # LUPUS XT1 PLUS, LUPUS XT2 PLUS, LLUPUS XT4, RADIO REPEATER V2 Reading time: approx. 5 minutes (for all variants) product Item No. Danger alarm %D F%29-p.html" t…

Set up Amazon Alexa to control your LUPUS Smarthome alarm system:

How to control your LUPUS Smarthome via Amazon Alexa # LUPUS SMARTHOME, AMAZON ALEXA Reading time: approx. 5 minutes (for all variants) To use Alexa with your XT, you need at least firmware version 2.17Z B Open your Alexa account via Alexa app or web…