Spare batteries
ABUS Alarmtechnik
ReferenceFU2990
6.85
The wireless opening detector (cc) Braun, (FUMK50000B) is a component of the Secvest (or the Terxon with a wireless extension module). It is a magnetic contact that secures doors and windows. Unauthorized opening is detected and reported to the wireless alarm center.
The optimal installation location for the wireless opening detector is the middle of your door or window frame. It can also be installed on the lower window frame if a specific window is to be tilted when the magnetic contact is secured.
The wireless opening detector consists of a detector and a magnet. These are installed parallel to each other at a distance of between 3 and 10 mm. The detector is triggered as soon as this distance increases. The wireless opening detector for the ABUS Secvest is available in elegant white (FUMK50000W / FUMK50010W) and brown (FUMK50000B / FUMK50010B).
When wired connection of additional zones, you can choose between NC wiring (FUMK50000B / FUMK50000W) and DEOL wiring (FUMK50010B / FUMK50010W). For the latter, the following are included in the scope of delivery: a line resistor (2k2) and an alarm resistor (4k7). You can connect the additional detection zone to a passive glass break detector, for example. This way you not only protect the window against unauthorized opening, but also against glass breakage.
Further settings, such as deactivating the LED or using the detector as a pure radio module, are possible via jumpers.
Manufacurer:
Weight:
Storage:
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Benjamin M. Tanner – Managing Director and Security Expert
Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.
check_circle
check_circle